You melt me

Published on by allie030Leave a comment

This month Rubbernecker Stamps is focusing on All the fabulous Christmas stamps and dies they carry for their Christmas in July theme.

Affiliate links – By purchasing through these links I receive a small percentage at no extra cost to you.

To make this card.

Cut from white card stock the second largest die from the pierced rectangles and stamp sentiment by covering the “some people” in tape while inking then remove tape to stamp.

Stamp snowflakes in black around sentiment and all over panel.

Die cut the word “You” and ink blend the shadow in a soft yellow.

Colour and die cut snowman and present.

Attach snowman and “you” with foam tape. Tuck and glue the present behind the word die.

Wrap twine around the bottom and tie in a bow.

Trim grey cardstock slightly larger then the pierced panel and glue to card base.

Attach panel.

Crafty Hugs,

Allie

3336D Snowmen with Presents Die( RBB )

https://ldli.co/e/49l1503336 Snowmen with Presents( RBB )

5406-06D You script w/ Shadow Die( RBB )

Nested Rectangle w/ Pierce Die 5023D( RBB )

Play in the puddles

Published on by allie030Leave a comment

Thanks for stopping by!, Sharing a sweet digital image released from Streamside Studios this month.

I combined multiple sets from Streamside Studios to create this card. Using this patchwork cutie digital stamp and Clear stamp images this made for such a sweet and easy card.

Product Links

Streamside Studios

To make this card.

Start with a white card base and panel.

Ink blend oxide ink in mowed lawn towards the bottom leaving a small section to ink blend with salty ocean oxide ink.

Stamp sentiment

Stamp, colour and attach vine.

Die cut stitched clouds and adhere with glue.

Add foam tape to the back of the duck and attach to your card panel.

Crafty Hugs,

Allie

Hi sweet Cheeks

Published on by allie030Leave a comment

Thanks for stopping by! Sharing a quick and easy card today using this gorgeous floral from Rubbernecker Stamps.

I did some quick stamping combining different floral sets for my background panel and attached to my card base.

I colour and fussy cut the flower and attached to my background panel with foam tape.

I attached the word “Hi” using Pinkfresh Studios Kelly Alpha Dies propped up on foam tape.

I finished the card with sweet cheeks embossed in white on black card stock.

Spectrum Noir Illustrators

Green – CG3,2,1,LY1

Flower – MG3,1,FS5,FS7

Florals – Rubbernecker Stamps

Hi Die – Kelly Alpha Lower Case Die Set

Crafty Hugs,

Allie

You make life beautiful

Published on by allie030Leave a comment

To make this card.

Start with a white card base.

Colour and die cut florals and leaves.

Add a circle die cut to your card base. Use foam tape on the back of the circle to give dimension.

Arrange florals and glue in place adding foam tape to sections hanging over the circle die cut.

Add a sentiment with foam tape towards the bottom.

Die cut the large hello die and attach to the center of the card.

Add some nuvo drops to finish the card.

Crafty Hugs,

Allie

Spectrum noir illustrator colours

Flowers – MG3,MG1,PP3

Leaves – CG3,2,,LY1

Products

Sentiment/hello die – Simon Says Stamp

Florals – Pretty Pink Posh

Some people are worth melting for

Published on by allie030Leave a comment

Thanks for stopping by. Playing with some cute snowman on a wintery inspired slimline card today using some Rubbernecker Stamps goodness for Christmas in July.

To Make this card

  • Blend Color Fuse Ink in blue on all the wavy negative inserts.
  • Stamp snowflakes on the negative pieces.
  • On the second insert from the top stamp sentiment.
  • Colour and die cut snowmen, trees and presents.
  • Glue down the negative inserts to white card stock using the frame to line up.  Trim the excess card stock and glue to card base and add the trees.
  • Glue down the frame and add presents and snowmen with foam tape.
  • I finished the card with some candy embellishments.

Color Fuse Set #8( RBB )

3332 Christmas Inchies( RBB )

5325-04D Slimline OPC Wavy Die( RBB )

3336D Snowmen with Presents Die( RBB )

3336 Snowmen with Presents( RBB )

3332D Christmas iniches Die( RBB )

Thanks for stopping by,

Crafty Hugs,

Allie

Shaker gift box

Published on by allie030Leave a comment

 

 

Hello everyone! Welcome to Tutorial Thursday!

ALLISON  here with you today to share a tutorial with you!

Today’s tutorial is:  SHAKER GIFT BOX

A fun little treat box with a shaker top.

PRODUCTS USED

Double Stitched Hexagon Die
Inverted Scallops Hexagon Die
Daisy Die
In My Heart Clear Stamp Set
Hearts & Harlequin Layering Stencils
Large Birdhouse Die
Heart Locket Die
Tweet Tweet Clear Stamp Set

COPIC COLORS

Bird – V01,000,0000,BG00,BG000
PAPER CUTS 
2 x 6″x6″ white card stock
2  3″ x3″ white card stock

Start by cutting two 6″ x 6″ panels of white card stock.  On one of them take 1/8″ or less off two of the sides.  This is your base and will help the lid slide over easier.

Score at 1 1/2″ on all 4 sides of both pieces.  Set lid aside (The panel that wasn’t trimmed down)
Cut the score lines on all 4 sides to form your tabs. (Base)
Cut notches in the tabs to assemble easier.
Trim approximately a 3″ x 3″ piece to fit in the center of your base.  Stamp all over and glue your character on.

Assemble Base

Lid

Score your lid again this time at 1/2″ on all 4 sides.  Your lid will now have 2 sets of score marks.  1/2″ and 1 1/2″ on all the sides.

Cut away the corners marked on photo on all 4 sides.  Cut angles to the remaining tabs.

Run lid through die cutting machine with hexagon die in the center.  Use a stencil to decorate the outer box lid.

Add acetate to the window on the inside of the lid.  Surround in foam tape.
Die cut from a scrap of white card stock the hexagon window again leaving enough space around to fit the center of the box lid.  Approx 3″x3″ 
Fill with shaker bits and assemble shaker.

Add a inked hexagon frame to each side of the window

Assemble lid.

Glue tabs in and fold over and glue the 1/2″ to finish.
Add die cut flowers and sentiment to the box lid.

Tie with ribbon.

You are sweet

Published on by allie030Leave a comment

Thanks for stopping by!

Sharing a sweet card with lots of die cut elements. Coloured with my illustrators I die cut lots of outdoor happiness and added with different dimensions to my card.

Image – Streamside Studios

Illustrators –

Turtle – CG1,2,3,LY1

Cake – FS6,PP1,MB1,MB2,GB1

Dies –

Rubbernecker Stamps

La-La Land Crafts

Crafty Hugs,

Allie

Big Wishes

Published on by allie030Leave a comment

Thanks for stopping by! Sharing a quick and easy birthday card today using stamps that have been tucked away in the back of the cupboard. We always gravitate towards the newest items that have been released so I’m revisiting my once loved stamps and dies and giving them some new love.

For this card I did some quick ink blending for my background using a cloud stencil. Alternating colours in blues and peach. I then stamped some hearts and flowers to the panel and filled them in with my illustrators.

I added some die cut clouds that I Ink blended as well.

A sentiment was stamped to the card panel as well as a cloud and the image was fussy cut and added with foam tape.

Crafty Hugs,

Allie

Colouring details

Spectrum Noir Illustrator markers

Balloon – BT1,AB1,AB2

Dress – CR3,CR1,PP1

Skin – FS6,FS4,TN3,TN2,CR1

Image – Newton’s Nook

Out of this world

Published on by allie030Leave a comment

Thanks for stopping by! Sharing this galaxy inspired card today using one of this months new release sets from Streamside Studios.

Product used

Streamside Studios

For this card I did some simple ink blending using oxide inks in the colours cracked pistachio, patina, and wilted violet for my background panel.

I added dots with a white gelly roll pen to my panel and embossed stars and hearts with gold embossing powder on the panel as well.

The moon was stamped then ink blended with oxide inks as well. I stamped my sentiment on the moon and embossed in white. I then fussy cut and attached it to my panel with foam tape.

I did some Copic colouring for the aliens and attached them with foam tape as well.

Copic colours

GREEN – YG17,23,01,03

BLUE – BG02,01,0000,B05

YELLOW – YR21,31

Thanks for stopping by,

Crafty Hugs,

Allie

Wish big

Published on by allie030Leave a comment

Love, love, love this months release from Rubbernecker Stamps. So much water inspired goodness and delicious dessert stamps are in this release.

Products Used

Rubbernecker Stamps

To make this card I started with a white round card base.

I added a circle die cut that was slightly smaller then my card base that I Ink blended in a tumbled glass oxide ink.

The next layer I added was slightly smaller again. This time I Ink blended a stencil with tumbled glass oxide ink. I added a scallop frame over top of this circle die cut.

Lastly, I added a small circle die cut with a sentiment stamped in the center and attached with foam tape as well as all my images.

Thanks for stopping by,

Crafty Hugs,

Allie